Classic Cars for Sale on Car and Classic UK.


Vintage & Prestige Fine Motorcars - ccts1407 Login
Website Contact Links
Vintage & Prestige Fine MotorcarsVintage & Prestige Fine Motorcars
Grays, Essex

tel: 01474527794     
LIVE adverts (217)

1927 Rolls Royce 20hp Doctors Coupe by Park Ward For Sale

Rolls Royce 1927 20 HP Park Ward Doctors Coupe with Dickey. Chassis number GMJ64 Registration number: YE8888 Perfection needs few words: A simply magnificent restoration over the past 7 or so years. This car has had over $250,000 spent upon it not including the cost of the car to start with & the owners own labor hours. We see many fine cars but I can safely say this ranks among the top cars we have ever handled; Need we say more? The car is currently in the USA. We can arrange shipping to anywhere in the world. It would be a perfect entree to the worlds best events such as Pebble Beach or Villa D'Este, Hamton Court COncours etc. An exhaustive list of the works undertaken is detailed below: The engine was rebuilt including; Main bearings; Big end bearings; Small end bushings; New rings; Camshaft redone; New valve springs; Guides; Seals; New cam shaft follower springs; New gaskets; Redone damper (slipper drive) drive with new discs, including set per factory special wrench; New oil pump. Fiennes in line oil filter. New oil sump float. Head and block were checked in correctly, fixed as needed, the cylinder liners had been replaced, re honed, new rings, and including pressure and leak tested and treated for weeping. The entire engine bolts, cleaned, re tapped, and repented and reinstalled. The engine was repainted high temperature 2K paint. The radiator was professionally cleaned out), and polished.The radiator was then further de-corroded (60 day fluid process) and then ceramic coated. The Dynamo was cleaned and checked and Polished and resembled. The Magneto was cleaned and checked, Polished and painted and reassembled. The mechanism between the Magneto and Dynamo was taken apart, cleaned, aligned and resembled for proper operation. The starter relay assembly was cleaned and polished, drained and re-oiled. The distributor was removed disassembled and a new bushing installed and reassembled. All new wires for the distributor and spark plugs. New distributor cap. The wiring throughout was completely replaced with period correct wiring along with the entire front and side conduits were replaced and the joints were cleaned and polished. The brake light actuator was reworked and new Springs and reassembled. The lines for the brake actuator were encased in conduits. The transmission was opened and cleaned drained and cleaned, new heavy duty oil. The clutch was inspected and is in perfect working order. All the linkage from the engine to the transmission was clean inspected and repainted. The Engine splash pans were removed, hot washed, light acid cleaned, reworked as needed. The carburetor was removed and sonically cleaned, and new Jets installed. A drain line for the carburetor was added. The auto vac was completely rebuilt with new float gaskets and a new box chamber, the Box chamber is made out of stainless steel so it will not corrode, and then it was painted high quality black. All linkage for the carburetor and distributor, radiator idle controls were cleaned painted and polished. The top valve cover was powder coated for longevity. The inspection covers on the right side for valve adjustment or powder coated for longevity. The upper and lower exhaust manifolds powder coated for longevity. A new multi-part fan belt was installed. New Nest Hill single and double fantail hose clamps installed total of 6. The water pump was disassembled, inspected, repacked and new gaskets. The radiator fan was removed along with the lower pulley and was down to bare metal and powder coated for longevity. The top valve cover was powder coated for longevity. The inspection covers on the right side for valve adjustment or powder coated for longevity. The upper and lower exhaust manifolds powder coated for longevity. All the oil lines and gas lines were professionally cleaned polished and reinstalled and checked for leaks. The engine was Bench tested for approximately 1 hour (3 times), each time re-torqueing the heads and resetting the valves. And then ran several times in the chassis with the same procedure. The petrol tank was removed de-corroded and then coated with a special sealer, and exterior powder coated for longevity. The gas tank line attachment was cleaned and polished and new screws fitted. The gas gauge was reworked including the dial face. The exhaust system was rebuild from all new to proper to Rolls Royce (RROE RROC) spec Drawings, including a 4 ft long 5” diameter silencer with cone ends and 8 bolt flanges, along with an outer 5.26 in diameter metal shroud with a fiber blanket between that and the silencer, and including the drilled interior baffles as shown in the drawing, and new brackets. The battery box was reworked and includes the battery top and Bakelite pieces on both sides along with the metal corners & bottom protectors. On off switch and trickle charge added. The rear axle differential was inspection plate taken off de-corroded, oil drained and re-oiled along with a new lower adapter nut so for easy maintenance. The front & rear brake lines were removed, cleaned, inspected and repainted. Entire body removed from chassis stripped to bare, epoxy primed, straightened and repainted. The body was removed from the chassis and the chassis was stripped, 2k and extreme Chassis paint painted. Front wings were reworked cracks fixed, new inner sheet metal supports and reinforcements. All new bolts nuts washers and lock washers throughout, if original weren’t reusable. The inspection plates were reworked will high quality paint and all new cheese head bolts screws. Front and rear license plates were completely taken off and any metal de-rusted new bolts nuts washers as needed. Front rear Enots oil fittings where replaced. All 44 Enots caps were replaced new. Front hydraulic suspension dampeners were cleaned re-oiled and caps re-plated and replaced. All 4 hubs were removed cleaned re-greased all brake shoes were like new including emergency brake. New Hub retaining rings and Felts were put in.Re-plated All 6 hub exterior parts out hub rings, all 4 exterior hub drive & 4 exterior hub gear catches, and all 4 inspection screws caps. The Klaxton was removed disassembled cleaned reassembled and the horn bell part re-platted in nickel along with the cheese head screws. The rear running lights/ brake lights replace with period correct CAV diver's helmet tail lamps from Genius of the Lamp UK. The front headlights and spotlights were completely reworked including new Lucas badges, re-plated, rewired including brackets and gaskets. The all 4 front windshield glass replaced. The 2 side roll up door glass were replaced. Both doors have the interiors completely removed reworked the wood reinforced and wood panels reinforced all new screws all new plating for any of the hardware including strike plates latches Etc. The door latch handles on the outside and inside were reworked and re-plated. The door locks were disassembled, reworked and re-plated. All the gauges and clock were interior cleaned, reworked, faces redone and repainted and reinstalled. All the woodwork throughout including, Dash trim pieces were professionally stripped (a special facility that strips wood without damaging it) and then wood preservative was soaked in for 30 days and then finished. Firewall conduits and support inside were completely reworked including new bolts nuts as needed. The wood floor boards throughout we're completely taken out reworked repaired as needed and repainted with 2k paint and reinstalled. The interior body panels were removed all nuts and bolts and screws removed, new interior sheer panels, new screws. The entire top was taken off, all the metal working pieces reworked refitted by Alan Taylor. 2 of the wood convertible top rails were manufactured to the exact same specifications and replaced. The top canvas and leather edging and wool liner all done by Alan Taylor. Jump seat small & large Doors, hinges, locking mechanisms, locking covers and handles for all reworked repainted re-plated including plated screws. The jump seat area was reupholstered with leather along with wool carpet and leather banding. The interior seats and side panel’s rear worked with new leather and wool carpeting with leather banding. The right & left interior to exterior vents on the body reworked and re painted. Lucas right & left turn signals were rewired reworked and reinstalled and realigned. The dash lights were reworked & reinstalled. The interior dome lights were rewired, new wiring & new Switch put in, new dome light glass replaced on one side to match original other side, the escutcheons that hold the glass we're re-plated and new light bulbs. The Lucas Windshield wiper was reworked, degreased, polished and exterior wiper mechanism plated and reinstalled. The front windshield was completely taken apart polished, new screws.The windshield Wingnuts were reworked re-plated along with the windshield locking mechanisms and windshield grab handles & new plated screws. The mirror was replaced with a period-correct pre-war high quality rear view mirror. The right and left spare tire exterior mirrors re-plated with nickel and new plating on the metal parts and new leather on the leather parts and new mirror glass. The rims stripped, grind sanded and primed and powder coated. All the external showing Hub pieces (3 parts per wheel and that's on 6 wheels) re-plated nickel. All 6 tires and tubes were replaced with Coker white wall 600 tires by 21. Flying lady was platted and is Period correct. The latches and catches for the hood and strike plates all reworked and polished and all nuts and bolts cleaned and Polished. All the hood metal was correctly cleaned, polished and one of the cracked panel’s hand remade and all new solid nickel riveting. The hinges were reworked and re-plated. The engine compartment strapping for underneath the hood was removed everything cleaned and re-plated everything cleaned. Park Ward makers plate replated re-work, plated and or polished. Window arms & handles re-plated polished. Door J-moldings and painted molding 2k repainted. Body wood stripped, reworked, primed and repainted. The door hinge screws replaced with inserts and machine screws for longevity. The weather stripping and felt and window weather stripping holders all reworked with new and re-plated and reinstalled. The wires and holders for the windshield wiper were manufactured period correct. The leather Gators were cleaned and leather protected and are in near-perfect condition. The leather protectors for the steering Knuckles and protectors were removed cleaned reworked or remade as necessary. Along with new strapping. The leather front brake line protectors cleaned reconditioned and new strapping. New bolts & aluminum washers for the engine Splash pans where installed. The rear luggage trunk was completely reworked including taking down to bare wood, all new period-correct 1920s Hardware latches and locks. New high quality nickel piano hinges and all high quality pan head rivets. New leather and special handmade leather corners and stitching protectors. New double-sided leather buckles so that you do not have to undo the leather strapping to open the trunk. New wool interior lining. A gallery of large high-resolution pictures may be viewed on our website. Office 01375 379719 Richard Biddulph 07967 260673 Christoff Cowens 07772188037 We accept Credit/Debit Cards. Part Exchange welcome. Weekend & evening viewings OK. Viewings by appointment : Prestige House. 9 Globe Industrial Estate, Grays, Essex, RM17 6ST

This advert has now been removed through sale or otherwise, please see the list below for similar live adverts

1912 Rolls Royce 1912 Rolls Royce Silver Ghost Rois Des Belges Chassis 2082 Array £1400000
1959 Rolls Royce 1959 Rolls Royce Silver Cloud 1 H.J. Mulliner Drophead Coupe Array £1025000
1910 Rolls Royce 1910 Rolls-Royce Silver Ghost “Rois-Des-Belges” style tourer Array £900000
1957 Rolls Royce 1957 Rolls Royce Silver Cloud 1 Drop Head Coupe. Array £560000
1914 Rolls Royce 1914 Rolls-Royce Silver Ghost 1914 Open Tourer by Hooper Array £550000
1951 Rolls Royce 1951 Rolls-Royce Silver Dawn Fastback Coupé Coachwork by Pin Array £525000
1924 Rolls Royce 1924 Rolls-Royce Silver Ghost 1924 Drophead Coupe by Park Ward Array £500000
1924 Rolls Royce 1924 Rolls-Royce Silver Ghost 1924 Open Tourer by Hooper Array £495000
1915 Rolls Royce 1915 Rolls Royce Silver Ghost London To Edinburgh Array £490000
1959 Rolls Royce 1959 Rolls-Royce Silver Cloud I Drophead Coupe Array £474536
1927 Rolls Royce 1927 Rolls Royce Phantom 1 Piccadilly Roadster Array £470000
1923 Rolls Royce 1923 Rolls Royce Silver Ghost Barker 3/4 Cabriolet Array £465000
1986 Rolls Royce 1986 Rolls-Royce Phantom VI LHD - 23.000 kms only Array £450000
1963 Rolls Royce 1963 Rolls Royce Silver Cloud III Drophead Coupe by H.J. Mul Array £445000
1962 Rolls Royce 1962 Rolls-Royce Silver Cloud 11 convertible Array £395000
2018 Rolls Royce 2018 Rolls-Royce Phantom. May 2018 Array £385000
1961 Rolls Royce 1961 Rolls Royce Phantom V James Young Sedanca Array £380000
1923 Rolls Royce 1923 Rolls-Royce Silver Ghost 1923 Springfield Piccadilly Roadstr Array £360000
1924 Rolls Royce 1924 Rolls-Royce Silver Ghost Barrel Sided Tourer Array £360000
1938 Rolls Royce 1938 Rolls-Royce Phantom III 1938 Sports Saloon by Gurney Nutting Array £350000
1959 Rolls Royce 1959 Rolls Royce Silver Cloud I Adaptation (convertible) Array £349950
1960 Rolls Royce 1960 Rolls-Royce Silver Cloud II Array £345000
1965 Rolls Royce 1965 Rolls Royce Silver Cloud 3 Flying Spur by H.J. Mulliner Array £330000
2019 Rolls Royce 2019/19 Rolls Royce Cullinan Array £329990
2015 Rolls Royce 2015 Rolls Royce Phantom Drop Head Coupé LHD Array £325000