Stunning Mini Cooper S MKII first registered 02/03/1970. This stunning example has been meticulously restored to a very high standard and has seen little use since. Please read the amazing full spec below....
Rare factory reclining front seats. Style 15" steering wheel. Smiths tachometer fitted in an SPQR cowling. Paddy Hopkirk throttle pedal. Maserati air horns. ( all in period parts ) Hydrolastic suspension with front shock absorbers and bump stops at the rear. Front has adjustable tie rods, negative camber bottom arms with 1 1/2 degree negative camber, rear has 1 degree negative camber with fixed radius arm brackets. Five Minilite 5"x10" wheels with stainless wheel nuts, shod with Yokohama AO32 tyres. Minifin rear brake drums. Longman cylinder head with balance chambers, ported and polished, thin width valve seats inlet 37mm, exhaust 31mm. ARP head studs. Commetic 1mm multilayer stainless steel head gasket. Titan 1.5 ratio roller rockers. MiniSpares mega dished pistons 10.5-1 compression, +040 bore. Swiftune SW5 cam and followers. MiniSport 4.5kg steel fly wheel and back plate. Swiftune electronic distributor with 16 advanced curves built in to suit any Mini engine from 850 to full race 1275. Janspeed exhaust manifold with twin box exhaust system. Standard fitment 13 row oil cooler. New mains big ends, new oil pump, crank polished, all new seals and gaskets etc. Carburettors twin 1 1/2" HS4 SU modified for flow, inlet manifold modified to suit and dowled to head. Cooling is by MiniSpares high capacity 2 core radiator plus new high capacity water pump. Cooling system filled with Evans Classic Cool which has a 180 degrees boiling point. New wiring loom fitted. Gear box fully rebuilt with new straight cut close ratio gear kit. MiniSpares four pin diff 3.44 ratio, Hardy Spicer outputs. Turbo clutch and balanced flywheel.
This car was completely stripped back to the bare shell, media blasted and fitted with new panels were required using either Heritage or Mini Machine panels. Panels fitted included front panel, wings, inner & outer A panels, door skins, full floors, heel board, closing panels, sills and boot floor. The shell was then completely sprayed inside and out and the underside stone chipped and painted body colour. Both subframes and suspension parts were either powder coated or painted. The car was then treated to waxoyl in all cavities and both doors. There is a file of paperwork with the car, Heritage certificate and rolling road print out showing 90.4 bhp @ 6000 RPM.
This is a stunning example and must be one of the nicest on offer at the present time.
Delivery & Finance possible
This advert has now been removed through sale or otherwise, please see the list below for similar live adverts